Filter
Top Products
ENG-12
9 Press the
,
❷
buttons until the NAME is selected.
The station name is set automatically from the
broadcast signal.
10 To change the programme’s name, press the
❿
button.
Result: The first letter of the name flashes.
MANUAL TUNING
PR : 1
CH : - -
MFT : -
NAME : - - - -
MEMORY : OK
RETURN
Presetting the Stations Manually
☛
You do not need to preset the stations manually if
you have already set them automatically.
1 After pressing the MENU, press the OK or
❿
.
Result: The Setup menu is displayed.
2 Press the corresponding
,
❷
buttons to select the
Install option.
3 Press the OK or
❿
to select this option.
Result: The Install menu is displayed.
11 To... Then...
Select a character Press the
,
❷
button until the
in the name required character is displayed
(letters, numbers or “-” character).
Move to the next or Press the
➛
or
❿
buttons
previous character respectively.
12 If you... Then...
Wish to store the
◆
Press the
,
❷
buttons
station displayed until the MFT is selected.
◆
Press the
➛
,
❿
buttons to
adjust the picture, if necessary.
◆
Press OK to store the station
Do not wish to
◆
Press the
,
❷
buttons
store the station until the CH is selected.
displayed
◆
Press the
➛
,
❿
buttons to
go on scanning the
frequency band and display
the next station
◆
Go back to the beginning of
Step 14
13 Repeat this procedure from Step 6 onwards, until
all the required stations have been stored.
14 On completion, press the RETURN button three
times to exit the menu.
Auto Setup
Manual Setup
Install
TV System : G
VCR Output CH : CH 36
4 Press the corresponding
,
❷
buttons, until the
Manual Setup option is selected.
5 Press the OK or
❿
to select a Manual Setup option.
Result: The TV STATION TABLE menu is displayed.
6 Press the
,
❷
buttons to select a programme
number as required.
7 Press the
❿
button to preset the station.
Result: The MANUAL TUNING menu is displayed.
TV STATION TABLE
PR CH NAME
1
2
3
4
5
SWAPPING : OK
DELETE : CLEAR RETURN
8 Press the
➛
or
❿
buttons to start scanning the
channels.
Result: The frequency band is scanned and the
first station found is displayed.