Filter
Top Products
ENG-35
Selecting the Audio Language
You can select a desired language quickly and easily
with the AUDIO button.
Using the Audio button
1 Press the AUDIO button.
2 Use the
➛
,
❿
buttons to select the desired language
on a DVD.
- The audio languages are represented by abbreviations.
3 Use the
➛
,
❿
buttons to select Stereo,
➛
or
❿
(On VCD/CD)
DVD
VCD / CD
➢
• This function depends on what languages are
encoded on the disc and may not work with all DVDs.
• A DVD disc can contain up to 8 audio languages.
• How to have the same audio language come up
whenever you play a DVD ; Refer to “Setting Up
the Language Features” on page 26.
Repeat Play
Repeat the current track, chapter, title, a chosen section
(A-B), or all of the disc.
When playing a DVD
1 Press the REPEAT button on the remote.
Repeat screen appears.
2 Select Chapter, Title or A-B using the
➛
,
❿
buttons.
• Press the REPEAT button. Select A-B on screen
with the
➛
,
❿
buttons.
• Press OK at the point where you want the repeat
play to start (A). The B is automatically highlighted.
• Press OK at the point where you want the repeat
play to stop (B).
• To terminate the function, press the CLEAR button.
• A-B REPEAT does not allow you to set point (B)
until at least 5 seconds has elapsed after point (A)
has been set.
Off
Chapter Title A - B
Off
Track Disc A - B
DVD
VCD / CD
3 Press OK.
4 To return to normal play, press REPEAT again, then
press the
➛
,
❿
buttons to select Off and press OK.
• It is available to press CLEAR button on the
remote controller in order to stop REPEAT play.
➢
• DVD repeats play by chapter or title, CD and VCD
repeat play by disc or track.
• Depending on the disc, the Repeat function may
not work.
• When in VCD 2.0 mode (MENU ON mode), this
function does not work.