Filter
Top Products
ENG-15
Before recording or playing back a cassette, you can
select the required system standard.
➢
When you playback an NTSC-recorded tape on
this DVD-VCR make a setting on the colour
system according to your TV. If your TV is a
PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43
compatible), set NT4.43 and you can record
NT4.43.
1 After pressing the MENU, press the OK or
❿
.
Result: The Setup menu is displayed.
2 Press the corresponding
,
❷
buttons to select
the User Set option.
3 Press the OK or
❿
to select this option.
Result: The User Set menu is displayed.
4 Press the corresponding
,
❷
buttons, until the
Colour System option is selected.
5 Press the OK or
❿
button to select
Auto
➝
PAL
➝
MESECAM
➝
B/W.
B/W Black and White
6 On completion, press RETURN three time to exit
the menu.
NICAM programmes are divided into 3 types. NICAM
Stereo, NICAM Mono and Bilingual (transmission in
another language). NICAM programmes are always
accompanied by a standard mono sound broadcast and
you can select the desired sound.
Please refer to page 20.
1 After pressing the MENU, press the OK or
❿
.
Result: The Setup menu is displayed.
2 Press the corresponding
,
❷
buttons to select
the User Set option.
3 Press the OK or
❿
to select this option.
Result: The User Set menu is displayed.
4 Press the corresponding
,
❷
buttons, until the
NICAM option is selected.
5 To... Press OK or
❿
, until...
Mono mode Off is displayed.
Off: Only set at this position to
record the standard mono
sound during a NICAM
broadcast if the stereo sound is
distorted due to inferior
reception conditions.
NICAM mode On is displayed.
On: Normally set at this
position.
6 On completion, press RETURN three times to exit
the menu.
Selecting the Colour Mode NICAM
Colour System : Auto
NICAM : On
IPC : On
User Set
Auto
PAL
MESECAM
B/W
Colour System : Auto
NICAM : On
IPC : On
User Set
On
Off