Samsung DVD-V940K DVD Player User Manual


 
A/V Receiver Connections
To take full advantage of the movie theater experience
that DVD offers, you may want to connect your DVD-
VCR to a complete Surround Sound system, including
an A/V Receiver and six Surround Sound speakers.
Before You Begin...
If your A/V receiver is equipped with a Dolby
Digital Decoder, you have the option to bypass the
DVD-VCR’s built-in Dolby Digital Decoder. Use the
Digital Audio Out connection below.
1 Digital Audio Out
Connect EITHER an optical cable OR a digital
coaxial cable from the Digital Audio Out jacks on the
back panel of the DVD-VCR to their corresponding
Digital Audio Input jacks on your A/V Receiver:
Optical
Coaxial
Use whichever connection is available on your
A/V Receiver.
To Digital Audio Input of an A/V
Receiver with a Dolby Digital Decoder
OR
ENG-30
During DVD/CD playback you can select from the
following special playback options. To resume normal
playback, press the
ll
button.
1 Still
Press the
ll
button on the remote control during
playback.
The picture will still and the audio will mute.
To resume playback, press the
ll
button.
If the player is left in Still mode for 5 minutes, it
will stop automatically.
2 Frame Advance (Step)
While in playback mode, press the F.ADV/STEP
button on the remote control to advance one frame
at a time.
Audio is muted during Frame Advance mode.
Press
ll
to resume normal playback.
NOTE: Frame Advance operates only in the forward
direction.
3 Skip Forward/Back
While a CD or DVD disc is in Play mode, press the
Skip
l➛➛ / l
buttons on the remote control or
front panel to jump forward and backward through
disc chapters/tracks.
Skip Forward will jump to the next chapter/track.
Skip Back will jump to the beginning of the current
chapter/track.
Press Skip Back again to jump to the beginning of
the previous chapter/track.
Search Forward/Back
While a disc is in Play mode, press and hold the
➛➛
/
buttons on the remote control or front panel to
visually search forward/backward at 2X - 4X - 8X -
16X - 32X - 128X speed. Press
ll
button to
resume normal speed.
4 Slow Motion
During playback, press the
ll
button to Still the
image. Then use the Search
to play in slow
motion at variable speeds.
Each press increases the slow motion speed
playback to 1/8, 1/4 or 1/2 normal speed.
Audio is muted during slow motion playback.
5 Stop/Resume
Press the Stop button once to stop playback.
To resume the DVD/CD from the point where the
disc stopped, press the
ll
button.
Press the
button twice to completely stop
playback. The next time you press
ll
, the disc will
start over from the beginning.
Special Playback Features