Filter
Top Products
English -
87
Playback
Check whether the disc is inserted cor-
rectly with the label facing up.
Check the regional code of the DVD
disc.
This DVD recorder cannot play some
types of discs. (See page 5.)
Checkpoint 1
Checkpoint 2
Checkpoint 3
Cannot play the disc.
You cannot use this operation or func-
tion due to one of the following rea-
sons:
(1) Your DVD disc restricts it.
(2) Your DVD disc does not support
this feature (for example: angles)
(3) The feature is not available at the
moment.
(4) You've requested a title, chapter, or
scan time that is out of range.
Checkpoint 1
icon appears on the screen.
The disc does not support all selected
functions. In this case, some settings
configured in the settings menu may
not work properly.
Checkpoint 1
Play mode settings are different from the settings
configured in the Settings menu.
The aspect ratio is fixed for DVD discs.
(See page 29.)
Checkpoint 1
Cannot change the aspect ratio.
Recording is possible for DVD-
RAM/DVD-RW/DVD-R discs only. If a
program is copy protected, it cannot be
recorded.
Checkpoint 1
I pressed the REC button but there is no response.
Each press of the Stop button during
recording creates a title. When the REC
PAUSE button is pressed, the paused
state is kept. When the REC Pause but-
ton is pressed again during REC pause,
the title under pause will be kept
recording.
Checkpoint 1
Differences between Using REC PAUSE Button and
Using Stop Button during Recording
The angle operation is available only
when the disc contains images captured
from different angles.
Checkpoint 1
The angle operation does not work while playing a
DVD disc.
Audio and subtitle languages are disc-
specific. Only the sound and subtitle
languages contained on the DVD disc
are available and displayed in the disc
menu.
Checkpoint 1
The selected audio and/or subtitle language is not
played.
86
- English
If your product malfunctions, go through the check-
points below before contacting a Samsung authorized
service center.
Power
Recording
Additional
Information
Troubleshooting
Troubleshooting......................................................86
Specification............................................................90
Warranty.................................................................91
The DVD recorder requires some time
to initialize and the input will be dis-
played for approx. 10 seconds after it is
turned on.
Checkpoint 1
Check whether the power cord is
securely plugged into the power outlet.
Did you set the DVD recorder channel
settings correctly?
Check the free space on your DVD-
RAM/DVD-RW/DVD-R discs.
Checkpoint 1
Checkpoint 2
Checkpoint 3
The input is displayed for a while when the power is
turned on.
Cannot record TV programs.
Additional Information
Additional Information