Filter
Top Products
95
Chapter 6: Settings, preferences, upgrades, and extras
Reviewing and controlling Caller ID
The Caller ID item in the SETUP menu allows you to view a list of calls that you
have received on the telephone line connected to your DIRECTV Receiver. It also
allows you to control whether the Caller ID feature is turned on or off. The Caller ID
feature only works if you subscribe to the caller ID service provided by your local
telephone service.
Turning the Caller ID feature on or off
To control whether your DIRECTV Receiver captures caller ID information, follow
these steps:
1 Press the MENU button on your remote control.
The Main menu appears.
2 Use the arrow buttons on your remote control to highlight the SETUP menu
item, then press the button on your remote control.
The SETUP menu appears.
3 Use the arrow buttons on your remote control to highlight the Caller ID menu
item, then press the button on your remote control.
The Caller ID menu appears.
4 Use the arrow buttons on your
remote control to highlight the
Display Caller IDs menu item, then
press the button on your
remote control.
A list appears, allowing you to select whether you would like the Caller ID
feature to be On or Off.
5 Use the arrow buttons on your remote control to highlight On or Off from the
list, then press the button on your remote control.
The list disappears, and the Display Caller IDs menu item on the Caller ID
menu reflects your choice.
Note: Caller ID messages for incoming calls that occur while you are taping a
program will be recorded on your tape. You might want to turn Caller ID off while
you are recording a program.