Filter
Top Products
38_ setup
setup
PTZ Setup
You can set the model, ID and speed of the PTZ camera for each channel including the size and cord.
Command Setup
See the previous section to repeat steps 1~3. (Page 36)
Use the up/down (
$%
) button to select <PTZ SETUP>,
and press [OK].
The “PTZ SETUP” screen appears.
Use the up/down (
$%
) button to select <COMMAND
SETUP>, and press [OK].
The “COMMAND SETUP” screen appears.
Use the up/down (
$%
) button to move to a desired item.
CHANNEL: Select a channel.
MODEL: Select a model available.
PTZ ID: Specify an ID number.
BAUDRATE: Set the bit rate for the applicable model.
COMMAND: Select a command.
LENGTH: Specify the duration of each command.
CODE: Displays a code that is associated with the
command.
When done, select <OK>.
Your setting will be applied.
If you select <DEFAULT>, the selected channel will be reset to the default, and if selecting
<ALL-DEFAULT>, all the channels will be reset to the factory default.
To return to the previous menu, select <ESC>.
4.
5.
6.
~
~
~
~
~
~
~
7.
8.
EXTERNAL DEVICE
ESC
TCP/IP SETUP
PTZ SETUP
MOUSE SETUP
AUDIO SETUP
SPOT SETUP
PTZ SETUP
ESC
COMMAND SETUP
SPEED SETUP
COMMAND SETUP
DEFAULT ALL-DEFAULT ESC
CHANNEL CH2
MODEL SAMSUNG
PTZ ID 000
BAUDRATE 002400 BPS
COMMAND P/T RIGHT-DOWN
LENGTH 09
CODE A0 00 00 01
00 0A 3F 3F
76
OK
02489A_SHR-3040_ENG.indb 38 2009-11-10 오후 2:13:52