Filter
Top Products
English _45
! SETUP
FACTORY DEFAULT
You can restore the settings to the factory default.
Factory Default
Press the [MENU] button on the front panel or remote
control.
The “DVR LOG-IN” dialog appears.
Enter the password and select <ENTER>.
The “MAIN MENU” screen appears.
Use the up/down (
$%
) button to select <FACTORY
DEFAULT>, and press [OK].
The “FACTORY DEFAULT” screen appears.
Use the up/down (
▲▼
) button to move to an item to reset
and select <ON>.
Select <DEFAULT> in the bottom.
The selected item will be reset to the factory default.
To reset all items, set <ALL> to <ON> and select <DEFAULT>.
Changing Factory Default
You can customize the factory default settings to your preference.
Connect a FAT 32 formatted USB storage device and
select <SAVE SETUP>.
When done, you will see a message of “LOAD SETUP
SUCCESS” on the screen.
All current settings of the DVR will be saved to the USB device.
It takes 5 to10 seconds, depending on the USB device.
When done, select <CHANGE FACTORY DEFAULT>.
You will see a message of “CHANGE FACTORY
DEFAULT SUCCESS” on the screen.
The factory default is changed successfully.
It takes 5 to10 seconds, depending on the USB device.
1.
2.
3.
4.
5.
`
1.
`
2.
`
MAIN MENU
EXIT
DISPLAY SETUP
RECORD
CONFIGURATION
EXTERNAL DEVICE
BACK-UP
FIRMWARE UPGRADE
FACTORY DEFAULT
LANGUAGE ENGLISH
SHUTDOWN
FACTORY DEFAULT
DEFAULT ESC
ALL OFF
-------------------------------------------------
DISPLAY SETUP OFF
RECORD SETUP OFF
SCHEDULE SETUP OFF
CAMERA SETUP OFF
CONFIGURATION OFF
EXTERNAL DEVICE OFF
CHANGE FACTORY DEFAULT
LOAD SETUP
SAVE SETUP
FACTORY DEFAULT
DEFAULT ESC
ALL OFF
-------------------------------------------------
DISPLAY SETUP OFF
RECORD SETUP OFF
SCHEDULE SETUP OFF
CAMERA SETUP OFF
CONFIGURATION OFF
EXTERNAL DEVICE OFF
CHANGE FACTORY DEFAULT
LOAD SETUP
SAVE SETUP
FACTORY DEFAULT
DEFAULT ESC
ALL OFF
-------------------------------------------------
DISPLAY SETUP OFF
RECORD SETUP OFF
SCHEDULE SETUP OFF
CAMERA SETUP OFF
CONFIGURATION OFF
EXTERNAL DEVICE OFF
CHANGE FACTORY DEFAULT
LOAD SETUP
SAVE SETUP
02489A_SHR-3040_ENG.indb 45 2009-11-10 오후 2:14:02