Filter
Top Products
English _49
! SETUP
If using a router
Check the followings to prevent a possible confl ict with the static IP of the DVR.
Using DVR Static IP
Internet Connection : You can connect the DVR to a ADSL/Cable modem-based IP router, or to the IP router
in the LAN environment.
DVR Network
Set <DHCP MODE> to <MANUAL> in “MAIN MENU >
EXTERNAL DEVICE > TCP/IP SETUP > IP SETUP”.
Check if the IP is a static IP provided by the router.
For information about the IP, gateway, and subnet mask, contact
your network administrator.
If the start (192.168.0.100) and end address
(192.168.0.200) of the DHCP server are already
specifi ed, provide other addresses (192.168.0.201~192.
168.0.524).
Check if the settings of the gateway and subnet mask match those of the IP router.
Router DHCP IP Address
To access the IP router menu, provide the router address in the address bar of the Internet browser from a
local PC in connection with the IP router.(ex: http://192.168.1.1)
Then, specify the network settings of the local PC as follows:
Ex) IP: 192.168.1.2
Subnet mask: 255.255.255.0
Gateway: 192.168.1.1
Use the address to connect to the IP router and open the setup page.
Access the DHCP setup menu of the IP router where you can select the DHCP server mode and specify
the start and end address.
Provide the start (192.168.0.100) and end (192.168.0.200) address, respectively.
The network settings may differ depending on the IP router.
1.
2.
`
M
`
1.
2.
`
3.
`
Network
LAN
SHR-3040
DSL Modem
LAN
IP Router
Check if the settings of the gateway and subnet mask match those of the IP router.
IP SETUP
ESC
MAC ADDRESS 00-0A-A2-08-08-F3
DHCP MODE MANUAL
IP DETECT
IP PORT 50000
IP ADDRESS 192.168.000.200
GATEWAY 192.168.000.001
SUBNET 255.255.255.000
BANDWIDTH HIGH (1.5Mbps↑)
WEB SERVER PORT 00080
OK
02489A_SHR-3040_ENG.indb 49 2009-11-10 오후 2:14:05