Filter
Top Products
English _43
! SETUP
Specify the start time, date range and size to backup.
You can specify the backup size for a backup device. The end time
and date will be set according to the backup size.
You can change the start time and date if you want to.
Select <BACK-UP>.
USB backup gets started.
During backup, recording will be stopped and the Live screen
will be lost in the viewer.
When backup is done, the start time will be moved later than the completion time, and the end time will be
adjusted according to the backup size.
Launch the web viewer from a remote PC where you can check the backup data using the <PLAYER>.
You can also play the data using <AUTO PLAYER> that is created in the USB storage device after the backup.
System Messages
You will see the following messages when the DVR has checked USB storage devices.
If no USB storage is inserted If a USB storage is recognized
USB STORAGE IS NOT AVAILABLE.
CHECK USB
RECONNECT THE USB STORAGE.
CONNECT THE OTHER USB STORAGE.
CHECK USB
THERE IS A FREE SPACE ON STORAGE.
USB STORAGE IS AVAILABLE.
During backup Error messages
START WRITING IN USB STORAGE.
FINISH WRITING IN USB STORAGE.
THERE IS A PROBLEM ON USB PORT
(If USB port does not operate properly)
USB STORAGE IS FULL. (No free space in the USB device)
CHANGE WRITE PROTECT MODE. (Write protection mode )
FILE SYSTEM IS NOT SUPPORTED.
(If the fi le system is not supported)
SIZE IS LARGER THAN FREE SPACE.
(If backup size is larger than the free space in the USB
device)
5.
`
`
6.
J
`
7.
8.
`
BACK-UP
CHECK USB BACK-UP ESC
HDD
START 2009/ 05/01 00:00:43
END 2009/ 05/01 00:00:15
MEDIA
PARTITION 3838MB/ 3848MB
START 2009/ 05/01 00:00:43
END 2009/ 05/01 00:00:14
SIZE 003836MB -> 3444MB
USB STORAGE IS AVAILABLE
02489A_SHR-3040_ENG.indb 43 2009-11-10 오후 2:13:58