Filter
Top Products
10-46
● Sequence Time
- As long as you are connected to SHR-4160N/P in Monitoring Mode while
Screen change is dominant, this sets up Screen change Time. The scope of
setup ranges from 5 to 30seconds.
● OSD Display
- Determines if OSD shall be displayed on each channel of Smart Viewer.
- Whether you check “Enable” or not, OSD will appear or not. However, Audio
icon, PTZ icon, REC icon, and Alarm/Motion event icon will not be affected by
the OSD Display condition.
● Callback Connection
- Selects the port to allow the connection of Callback.
● Auto Connection
- Determines if Smart Viewer shall be automatically connected to SHR-4160N/P
or Site as soon as it starts running.
- If you check “Auto Connection On”, the name of SHR-4160N/P and Sites that
are currently registered in DVR/Site List will be listed as follows and if you select
one, it will be automatically connected to the selected SHR-4160N/P or Site as
soon as Smart Viewer starts running.