Filter
Top Products
SHR-4160N/P USER’S MANUAL
5-3
● Date Format
This supplies 3 formats, Year-Month-Date / Date-Month-Year / Month-Date-Year.
● Time Format
This supplies 2 formats, 24 Hour / 12 Hour(AM/PM).
● Language
After you select a language, OSD is expressed in the selected language.
The available languages are added in the list.
● DST(Daylight Saving Time)
DST sets the watch one hour faster than the local standard time.
This makes the system count for DST in DST regions.
Being the DST setup date, the set goes one hour faster and starts rebooting.
Set to Off, DST does not operate. Then, you are unable to enter the right date
menu. Set to On, you can set the start time on the left and the end time on the
right on the basis of ‘~’. DST is allowed to set Month/Date/Time only.
Year/Minute/Second remains inactivated.
Note
Note
[Date/Time Change]
Pressing “OK” after you change date and time, you will be asked by a pop-up win-
dow if you really confirm the change. Here, press “Yes” to change the time. Since
Date/Time does not change in backup process, be sure to stop the
backup process before you change Date/Time.
Note
Note
[When the DST is operated]
The proceeding backup is cancelled. Recording in progress will be suspended for a
moment until rebooting.
Caution
Caution
[Date/Time Change]
If you restore Date/Time to the original value, the data recorded before the restora-
tion may be deleted. For example, if you restore 8 am to 7 am, all the data recorded
between the times will be deleted.
Caution
Caution
[When the DST is operated]
As the system goes one hour earlier, the data recorded since an hour ago will be
deleted. As DST activates at the preset time, you are recommended to take the
utmost care of preventing any trouble incurred by data deletion or rebooting.