Filter
Top Products
3
Connecting IEEE1394 Device
● Connect the IEEE1394 hard disk through the back port of SHR-4160N/P.
● You can connect up to 6 IEEE1394 armored hard disks by the Daisy-Chain
method.
● After connection, Menu - System - HDD Setup is necessary for recognition and
setup for use.
● It acts as HOT PLUG to connect or disconnect the IEEE1394 device while the sys-
tem is running.
● If you press Connect/Disconnect in Menu - System - HDD Setup, HOT PLUG will
be recognized or deleted.
SHR-4160N/P USER’S MANUAL
3-3
Note
Note
See 5-8 System (HDD Setup) of User’s Manual.
Caution
Caution
- Wait until the HOT PLUG connected hard disk is stabilized enough (approx. 2 sec-
onds per each hard disk) and click CONNECT in SHR-4160N/P MENU before use.
- Be sure to click DISCONNECT in SHR-4160N/P MENU to delete IEEE1394 Device
safely. Failure of clicking DISCONNECT may cause improper operation of IEEE1394
Device.
Caution
Caution
The IEEE1394 Device hard disk shall be set to Master.