Filter
Top Products
Getting Connected
Choose the Setup That Suits You
There are several ways to connect your receiver to match your particular equipment setup and to
gain optimum signal quality. The following pages illustrate some of the most common setups.
Connecting Your Samsung Fliptop powered by DIRECTV
®
with an Satellite In Input
1) Connect the RG-6 RF coaxial cable from your satellite dish to the jack labeled SATELLITE
IN on the Samsung Fliptop powered by DIRECTV
®
.
2) Plug one end of the telephone cord into a phone jack on your wall (or into a phone splitter that
is plugged into a phone jack) and the other end into the PHONE JACK on the back of the
Samsung Fliptop powered by DIRECTV
®
.
3) Plug all power cords into electrical sockets.
Now you can turn to page 22 to learn about Guided Setup and Activation.
18
When working with cables, be
sure to connect corresponding
inputs. Never connect an IN to
an IN or an OUT to an OUT.
All A/V jacks and inputs are
color coded. Always match the
color of the plug to the same
color of the jack.
OUT
IN
TIP
Choose the Setup That Suits You