Filter
Top Products
English - 31
Selecting the Picture Size (4:3 Models)
Picture
Mode : Dynamic
√√
Custom
√√
Colour Tone : Normal
√√
Size
√√
Scan Mode : Auto
√√
Digital NR : Off
√√
▼ More
TV
Move Enter Return
Size
Normal
Zoom1
Zoom2
Cinema
TV
Move Enter Return
You can select the picture size which best corresponds to your
viewing requirements.
1 Press the MENU ()button.
Result
: The main menu is displayed.
2 Press the ▲ or ▼ button until the Picture is selected.
Result
:
The options available in the
Picture
group are
displayed.
3 Press the ENTER () button.
4 Press the ▲ or ▼ button until the Size is selected. Press the
ENTER () button.
Result
:
The
Size
menu is displayed.
5 Select the required mode by pressing the ▲ or ▼ button. Press
the
ENTER () button.
Result
: The following modes are available:
Normal
Adjusts the picture to fit a 4:3 normal aspect
ratio. (Prolonged use in 4:3 mode may cause the
lifespan of the CRT to be reduced.)
Zoom1
Vertically enlarges the picture by approximately 130%.
Zoom2
Vertically enlarges the picture about by approximately
150%.
Cinema
When the top and bottom of the screen margins are
black (blank), they will change to gray.
➢
Lifting is available in the Zoom1 or Zoom2 mode by pressing
the
▲ or ▼ button.
➢
◆ You can select these options by simply pressing
the
P.SIZE button on the remote control.
◆ The picture size cannot be changed in PIP mode.
4:3 Signal
16:9 Signal
Normal Zoom1 Zoom2 Cinema
Normal Zoom1 Zoom2 Cinema
BP68-00341A (J61A_Euro_ENG) 2004/07/29 11:17 AM Page 31