Filter
Top Products
English - 48
Selecting the Sound Mode
The “DUAL I-II” button displays/controls the processing and output
of the audio signal. When power is switched on, the mode is
automatically preset to either “Dual I ” or “Stereo”, depending on
the current transmission.
➢
◆ If the receiving conditions deteriorate, listening will be
easier if the mode is set to
Mono.
◆ If the stereo signal is weak and automatic switching
occurs, switch to
Mono.
◆ When receiving mono sound in AV mode, connect to the
“AUDIO-L” input connector on the panel (front or side,
depending on the model). If mono sound only comes out
of the left speaker, press the
DUAL I-II button.
Type of broadcast
Regular broadcast
(Standard audio)
Regular +
NICAM Mono
NICAM Stereo
NICAM Dual I/II
Regular broadcast
(Standard audio)
Bilingual or Dual I/II
Stereo
On-screen indication
Mono
(Normal use)
NICAM ↔ Mono
Mono (Normal)
NICAM ↔ Mono
Stereo (Normal)
Mono (Normal use)
Dual I ↔ Dual II
Stereo ↔ Mono
(Forced mono)
NICAM → NICAM → Mono
Dual I Dual II (Normal)
NICAM
Stereo
A2
Stereo
→
→
BP68-00341A (J61A_Euro_ENG) 2004/07/29 11:18 AM Page 48