Filter
Top Products
English - 43
Dolby Digital mode allows you enjoy Dolby Digital sound effect
fully with the speakers connected to the television.
This allows various modes for the main, center, surround and
woofer speakers to be selected.
1 Press the MENU ()button.
Result
: The main menu is displayed.
2 Press the ▲ or ▼ button until the Sound is selected.
Result
:
The options available in the
Sound
group are displayed.
3 Press the ENTER () button.
4 Press the ▲ or ▼ button until the Dolby Digital is selected.
Press the
ENTER () button.
Result
: The Dolby Digital menu is displayed with the Dolby
ProLogic
II selected.
5 Press the ENTER () button again. Select Off or On by
pressing the
▲ or ▼ button. Press the ENTER () button to
confirm.
➢
For further details on output depending on each option, refer
to page 45.
6 If you wish to adjust the volume properly during night viewing,
press the
▲ or ▼ button until the Dynamic Range is selected.
Press the
ENTER () button.
7 Select Off or On by pressing the ▲ or ▼ button. Press the ENTER
() button to confirm.
➢
Manufactured under license from Digital
Theater Systems, Inc. US Pat. No.
5,451,942, 5,956,674, 5,974,380,
5,978,762 and other world-wide patents
issued and pending. “DTS” and “DTS Digital Surround”
are registered trademarks of Digital Theater Systems, Inc.
Copyright 1996, 2000 Digital Theater Systems, Inc. All
Rights Reserved.
➢
Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro Logic”, and
the double-D symbol are trademarks of
Dolby Laboratories.
Setting up Dolby Digital
Sound
Mode : Custom
√√
Custom
√√
Auto Volume : Off
√√
Dolby Digital
√√
Digital Audio Input
√√
TV
Move Enter Return
Dolby Digital
Dolby Pro Logic II : Off
√√
Dynamic Range : Off
√√
Level Control
√√
Time Delay
√√
TV
Move Enter Return
Off
On
Dolby Digital
Dolby Pro Logic II : Off
√√
Dynamic Range : Off
√√
Level Control
√√
Time Delay
√√
TV
Move Enter Return
Off
On
BP68-00341A (J61A_Euro_ENG) 2004/07/29 11:18 AM Page 43