Filter
Top Products
English - 12
Switching Your Television On and Off
TV
The mains lead is attached to the rear of your television.
1 Plug the mains lead into an appropriate socket.
➢
The main voltage is indicated on the rear of the television
and the frequency is 50 or 60Hz.
2 Press the power switch on the side of the television to “ON” (I).
Result
: The Standby indicator on the front of the television
lights up.
3 Press the POWER () button on the remote control to switch the
television on.
Result
: The programme that you were watching last is re-
selected automatically.
➢
◆ If your television isn’t turned on when the POWER ()
button is pressed, press the
SELECT button to check if
“
TV” mode has been chosen.
◆ If you have not yet stored any channels, no clear picture
appears. Refer to “Storing Channels Automatically” on
page 20 or “Storing Channels Manually” on page 22.
4 To switch your television off, press the power switch to “OFF”.
Placing Your Television in Standby Mode
Your television can be placed in Standby mode, in order to reduce
the power consumption.
Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
1 Press the POWER () button on the remote control.
Result
: The screen is turned off and the Standby indicator on
the front of the television lights up.
2 To switch the television back on, simply press the POWER ()
button again or a numeric button.
➢
You can also switch the TV back on by pressing the TV (),
P
/
or numeric button.
☛
Do not leave your television in Standby mode for long
periods of time (when you are away on holiday, for
example). Turn your television off by pressing the
power switch to “
OFF”. It is best to unplug the set from
the mains and aerial.
TV
BP68-00341A (J61A_Euro_ENG) 2004/07/29 11:16 AM Page 12