Filter
Top Products
English - 32
Selecting the Picture Size (Wide Models)
Picture
Mode : Dynamic
√√
Custom
√√
Colour Tone : Normal
√√
Size
√√
Scan Mode : Auto
√√
Digital NR : Off
√√
▼ More
TV
Move Enter Return
Size
Auto Wide
16:9
Panorama
Zoom1
Zoom2
4:3
Cinema1
Cinema2
TV
Move Enter Return
You can select the picture size which best corresponds to your
viewing requirements.
1 Press the MENU ()button.
Result
: The main menu is displayed.
2 Press the ▲ or ▼ button until the Picture is selected.
Result
:
The options available in the
Picture
group are
displayed.
3 Press the ENTER () button.
4 Press the ▲ or ▼ button until the Size is selected. Press the
ENTER () button.
Result
:
The
Size
menu is displayed.
5 Select the required mode by pressing the ▲ or ▼ button. Press
the
ENTER () button.
Result
: The following modes are available:
Auto Wide Automatically enlarges the picture to fit the 16:9
aspect ratio providing optimum display.
16:9 Adjusts the picture to fit the 16:9 wide aspect
ratio.
Panorama Adjusts a Wide picture to appear natural.
Zoom1
Vertically enlarges the picture by approximately
130%.
Zoom2
Vertically enlarges the picture about by
approximately 150%.
4:3 Adjusts the picture to fit a 4:3 normal aspect
ratio. (Prolonged use in 4:3 mode may cause the
lifespan of the CRT to be reduced.)
Cinema1
To maintain optimum screen display, the picture is
vertically enlarged and the letterboxed (black margin)
area is filled with gray instead.
Cinema2
When the top and bottom of the screen margins are
black (blank), they will change to gray.
➢
◆ Lifting is available in the Zoom1 or Zoom2 mode by
pressing the
▲ or ▼ button.
◆ Subtitles may be cut-off or hidden below the screen area
in
Zoom1, Zoom2, Cinema1, and Cinema2 modes.
➢
◆ You can select these options by simply pressing the
P.SIZE button on the remote control.
◆ The picture size cannot be changed in PIP mode.
BP68-00341A (J61A_Euro_ENG) 2004/07/29 11:17 AM Page 32