Filter
Top Products
English - 44
8 Press the ▲ or ▼ button until the Level Control is selected.
Press the
ENTER () button.
Result
: The Level Control menu is displayed with the Test
Tone
selected.
9 Press the ENTER () button again. To simulate the volume of
the speakers, select
On by pressing the ▲ or ▼ button. Press the
ENTER () button.
10 Select the speaker (Front Left, Center, Front Right, Rear
Right
, Rear Left, or Sub Woofer) by pressing the ▲ or ▼
button. Press the ENTER () button.
11 Select the speaker to simulate, adjust the volume by pressing the
œ or √ button.
12 When you have finished the level control, press the MENU ()
button.
Result
: The Dolby Digital menu is displayed again.
13 To set the delay time of the surround channel, select Time Delay
by pressing the ▲ or ▼ button. Press the ENTER () button.
14 Select the option (Rear Right or Rear Left) to be adjusted by
pressing the
▲ or ▼ button. Press the ENTER () button.
Press the
œ or √ button until you reach the optimal setting.
Press the
ENTER () button to confirm.
Setting up Dolby Digital (continued)
Dolby Digital
Dolby Pro Logic II : Off
√√
Dynamic Range : Off
√√
Level Control
√√
Time Delay
√√
TV
Move Enter Return
Level Control
TV
Move Enter Return
Test Tone : Off
√√
Front Left 0dB
Center 0dB
Front Right 0dB
Rear Right 0dB
Rear Left 0dB
Sub Woofer 0dB
Off
On
Level Control
TV
Move
œœ √√
Adjust Return
Test Tone : Off
√√
Front Left 0dB
Center 0dB
Front Right 0dB
Rear Right 0dB
Rear Left 0dB
Sub Woofer 0dB
Dolby Digital
Dolby Pro Logic II : Off
√√
Dynamic Range : Off
√√
Level Control
√√
Time Delay
√√
TV
Move Enter Return
Time Delay
TV
Move
œœ √√
Adjust Return
Rear Right 5ms
Rear Left 5ms
BP68-00341A (J61A_Euro_ENG) 2004/07/29 11:18 AM Page 44