Filter
Top Products
57
Chapter 5 Operations
5.1 Preliminary Checks before Starting Operation
. Before Power up, be sure to check NTSC or PAL and select the right monitor out put between
Composite and VGA by using the switch on the rear panel of the unit. See the details as below.
Video mode Video output
SETTING
NTSC PAL BNC VGA
Factory Default
O X O X
X O O X
O X X O
X O X O
5.2 Power Connection
. Connect the Power cable to power up the unit.
. After power-up, the presence of video input signals is automatically recognized.
. All setting values are kept even after a sudden power failure.