Filter
Top Products
z
4:3
Time
1. Current Time
Establishes the standard time of the monitor.
In Hours, Minutes and AM/PM, select the time, and click the Apply button.
The current standard time of the monitor will be set.
To activate the On/Off Timer at the set time, the
Current Time must be set.
z
Hours
z
Minutes
z
AM/PM
2. On Timer
Select the time, output source and volume, and click the Apply button. The monitor will turn on
with the established source and volume at the established time.
When Activated is OFF, the ON Timer will not work.
z
Hours
z
Minutes
z
AM/PM
z
Activated
z
Source
z
Volume
3. Off Timer
Select the time and click the Apply button. The monitor will turn off at the set time.
When Activated is OFF, the Off Timer will not work.
z
Hours
z
Minutes
z
AM/PM
z
Activated
PIP
1. Size
Select a size. (The size selection has an 'ON' function)
2. Source
When selecting sources to be output to PIP, the relevant source will be applied to PIP.
When trying to change a source where PIP cannot be applied or the combination of Main/Sub is
incompatible,
a warning message will appear on the monitor.
Settings