Filter
Top Products
2. Set up the left and right stands respectively.
3. Put the stand into the hole at the bottom of the monitor.
Insert screw into the hole indicated and tighten. (M4 × L15)
This stand is originally designed for the adjustment of the screen angle. And the company is not
responsible for any problem caused by any use of this stand. Do never use the product as a
stand on which something is placed.
2. Installing Stand Kit (sold separately)
1. A 'Cover-Protector' is used to protect the hole at the bottom of the monitor, where the stand is
inserted. Be sure to remove the 'Cover-Protector' when attaching the provided Semi Stand or stand
kit (sold separately) and cover the hole using the 'Cover-Hole' when attaching the wall mount kit.
2. Make sure you put the parts in the right direction and in the right place. (M4 × L15)
3. Put the stand into the hole at the bottom of the monitor.
4. Insert screw into the hole indicated and tighten. (M4 × L15)
In case of Power cord with Earth
In the event of failure, earth lead may cause electric shock. Make sure to wire
the earth lead in an approprite manner, before plug-in the AC power. Or,
when un-wire the earth lead, make sure to plug-off the AC power in advance.
AV input devices like DVDs, VCRs or Camcorders as well as your computer may be connected to
the monitor. For detailed information on connecting AV input devices, refer to User Controls under
Adjusting Your Monitor.