Filter
Top Products
1. Picture
For input sources other than for PC signals,
adjust the Contrast, Brightness, Sharpness, Color, Tint and Color Tone of the monitor.
z
Contrast
z
Brightness
z
Sharpness
z
Color
z
Tint
z
Color Tone
2. Picture PC
When the output sources are PC signals,
adjust the Contrast, Brightness, Sharpness, Color, Tint and Color Tone of the monitor.
z
Contrast
z
Brightness
z
Red
z
Green
z
Blue
3. Audio
Adjust the Bass, Treble and Balance, and set Main/Sub for the Sound Select of
Dolby Virtual ON/OFF, BBE ON/OFF and PIP.
In the course of making adjustments, changes appear as OSDs on the monitor screen.
z
Bass
z
Treble
z
Balance
z
Dolby Virtual
z
BBE
z
Sound Select
4. Adjust Image Lock
Course, Fine, and select Position.
z
Coarse
z
Fine
z
Position
z
Auto Adjustment
Maintenance
1. Lamp Control
You can control the intensity of the lamp.
(Auto/Manual is available. When Auto is running, Manual is off; and when Manual is running,
Auto is off.)
In Auto mode, the lamp is adjusted to the previously set value at the set time.
In Manual, the previous value is maintained.
z
Auto
z
Hours
z
Minutes
z
AM/PM
z
Value
z
Manual
2. Scroll
This function prevents the screen status changing when the same screen is maintained
continuously.
If you select the Period and Time and press the Apply button, the screen
will scroll downwards at the speed of the previously set time in Period.
For example, for Period 1, Time 5, the screen will be renewed every hour at a speed of 5
seconds.