Filter
Top Products
Remove the 4 screws on the back of the
product.
Insert the screw
B
into the plastic hanger.
1. Mount the product on the wall bracket and
make sure it is properly fixed to the left and
right plastic hangers.
2. Be careful when installing the product on the
bracket as fingers can be caught in the holes.
3. Make sure the wall bracket is securely fixed to
the wall, or the product may not stay in place
after installation.
Tighten the 4 screws in step 2 (plastic hanger +
screw
B
)to the rear holes of the product.
Remove safety pin (
3
) and insert the 4 product
holders into the corresponding bracket holes (
1
).
Then place the product(
2
) so that it is firmly fixed
to the bracket. Make sure to re-insert and tighten
the safety pin (
3
) to securely hold the product to
the bracket.
A. Monitor
B. Wall Bracket
C. Wall
Wall Bracket Angle Adjustment
Adjust the bracket angle to -2°before installing it on the wall.