Filter
Top Products
6
Getting Started
English
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
✎
Connecting the power cord and antenna.
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWER
P
button. Plug & Play is available only when the Input source is set to TV.
✎
To return previous step, press the red button.
1
Selecting a language
Press the ▲ or ▼ button, then press the ENTER
E
button.
Select the desired OSD (On Screen Display) language.
P
POWER
ADGUIDE
MEDIA.P
SUBT.
DUAL
P.MODES.MODEP.SIZE
SRS
2
Selecting Store Demo
or Home Use
Press the ◄ or ► button, then press the ENTER
E
button.
y Select the Home Use mode. Store Demo Mode is for retail
environments.
y Return the unit’s settings from Store Demo to Home Use
(standard): Press the volume button on the TV. When you see the
volume in the OSD, press and hold MENU for 5 sec.
3
Selecting an antenna
Press the ▲ or ▼ button, then press the ENTER
E
button. Select Air, STD, HRC or IRC.
4
Selecting a channel
Press the ENTER
E
button to select Start. The channel search will start automatically.
For more information, refer to Channel → Auto Program. (p.11)
✎
Press the ENTER
E
button at any time to interrupt the memorization process.
5
Setting the clock
Press the ◄ or ► button to select Month, Day, Year, Hour, Minute or am/pm.
Set these by pressing the ▲ or ▼ button.
6
Enjoy your TV.
Press the ENTER
E
button.
If You Want to Reset This Feature...
O
MENU
m
→ Setup → Plug & Play → ENTER
E
✎
The position of power input port may differ depending on the model.
VHF/UHF Antenna
Cable
or
TV Rear Panel
[UD5003-SA]BN68-03716A.indb 6 2011-04-27 �� 4:40:07