Filter
Top Products
Press MENU or SELECT button on the remote
control unit. Program 4 is now completed.
To set another program, repeat steps [2] to [15].
MENU
SELECT
m
Press POWER button on the TV/VCR or on the
remote control unit. The TIMER REC indicator
lights up.
POWER
o
TIMER REC
While watching TV, "TIMER REC STANDBY"
starts flashing on the TV/VCR screen 2 minutes
before the programmed start time.
You must turn off the TV/VCR to activate auto-
matic timer recording.
Note: When the programs overlap, the earlier pro-
gram has priority.
9:00AM 10:00AM 11:00AM 12:00PM
If you programmed as per as the above illustration
the timer recording would be carried out as fol-
lows:
9:00AM - 11:00AM for PROGRAM 2
11:00AM - 12:00PM for PROGRAM 1
12:00PM - for PROGRAM 3
DAILY PROGRAM
To record a program at the same time on the same
channel every day, follow steps [1] to [6] on page
22 then continue with step [7a] below.
Press CH./SET "_" or "_" repeatedly or enter "00"
with number button. "DAILY" appears on the TV
screen.
1 2 3 4
C::::3C_ 1--'1r'_
5 6 7 8
r'-i r"_ r'-'i C:_
I PROGRAM NUM,BF-_ 3
END TIME - - :....
CHANNEL - -
TAPE SPEE0 ~ -
After I second, continue with step [9] on page 23
onwards.
WEEKLY PROGRAM
To record aprogram at the same time on the same
channel every week, follow steps [1] to [6]on page
22 then step [7b] below.
Press CH./SET "_" or "v" button repeatedly until
your desired date of the week is displayed.
(Example: W SUN)
w" CH./SET A
PROGRAM NU_BE@,_.,= ,T,p,3 I
_DATE _IIl_; w sul$,_
ST^.T_ME.,E:|-_°--
END13ME :
CHANNEL - -
TAPE SPEE0 - -
After I second, continue with step [9] on page 23
onwards.
TO CORRECT OR DELETE A PRO-
GRAM
• Press DELETE button to go back one step from
current step during steps [6]~ [14].
• If you finished setting program, press SELECT
button repeatedly (or press DELETE button to
go back one step) until your desired digit
flashes and reset program during steps
[6]-[14].
• You may cancel the entire program by pressing
DELETE button at step [5].
- 24 -