Filter
Top Products
[_lllB_][4_J_idld_,I_ d;ILV_l
You may set the TV/VCR to start and end recording
one program within 24 hours by simply pressing
QUICK SET PROGRAM button on the TV/VCR.
It is easy for you to record today's TV program.
• Power must be on to set Quick Set Program.
• Clock must be set to the correct time before
setting the timer.
• Quick Set Program is memorized to program
number 8.
In the example below, the Quick Set Program is
being set to record:
SETTING TIME from 10:00PM to ll:00PM
CHANNEL CH10
TAPE SPEED SP
Current time is 8:00PM.
Note: This function is not operative with the
remote control.
Press SET "+" or "-"button until your desired start
time hour is displayed. (Example: 10)
VCHANNEL •
_-q c-----}
SET +
.(_Jl_N SET P ROC_AM-
E.DTI.E"!.): --
CHANNEL0e
TAPE SPEED SLP
IBI
Press SET "+" or "-" button until your desired start
time minute is displayed.
(Example: 00)
VCHANNEL •
CZZZ3 _---q
SET +
-QUICK SET pROGRAM-
DATE 0_ THU
-STAreTI_.,,'_'IA,
END TIME --: ....
CHANNEL 0e
TAPE SPEED SI.P
Insert a cassette tape with its erasure prevention
tab in place, if necessar_ rewind or fast forward
the tape to the point at which you want to begin
recording. Timer display will be changed to the
Counter mode.
Press QUICK SET PROGRAM button on the
TV/VCR.
MON ITOR
CZD
QUICK SET
PROGRAM
-OUK_KSET PROgRAM-
DATE l O_5 THU
.STAm'd_E_ ..
CHANNEL ¢e
TkPE _EED
Press SET "+" or "-" button until AM or PM is
displayed. (Example: PM)
VCHANNEL •
SET +
-QUICK SET PROGRAM.
DATE 0_'25 THU
-s'r^m'.,.,E,o_._<:,*
._..a_,
END TIME
CHANNEL 0e
TAPE SPEED
O
Press SET "+" or "-" button until your desired end
i_mehour is displayed. (Example: 11)
VCHANNEL •
_ CZZZ3
SET +
-QU_K SET PROGRAM-
DATE 0_25 THU
STARTTIME ,!0:1_ PM
--ENDTl_? 'i,'_ P.
CHANNEL*'* fDe"_
TAPE SPEED ,_.P
NOTE:
1)Key inputs for steps[2]~[10] should be
done within 2 seconds, otherwise input
mode will forward to next mode.
2)You mayforward to next step when you
press SELECT button on the TV/VCR.
3)When you press CLEAR button on the
TV/VCR, all input data will be erased
and return to initial display (step [2]).
Press SET "+" or "-" button until your desired end
time minute is displayed. (Example: 00)
VCHANNEL 4,
r--_} €'_-q
SET +
-QUICK SET pROGRAM*
DATE 03/25 THU
STARTTIME lO_ PM
CHANNEL _ "N
TAPESPEED SkP
- 25 -