Filter
Top Products
-14
Setting up the Monitor Network Environment
3. Setting up a Network
Connection for the
Monitor
Settings for such items as the monitor’s IP ad-
dress and subnet mask are compatible with
the existing network.
Set each item on the monitor as follows. (See
page 38 of the monitor’s operation manual for
setting.)
DHCP Client : OFF
IP Address : 192.168.150.002
Subnet Mask : 255.255.255.000
1 Start Internet Explorer (version
5.0 or later) on the computer,
and enter “http://192.168.150.2/
” in “Address”, and then press
the “Enter” key.
2 If a user name and a password
have not yet been set, just click
the “OK” button.
• If a user name and a password have
been set, input the user name and the
password, and click the “OK” button.
• If the user name or password is entered
incorrectly three times, an error mes-
sage will be displayed.
• When you are using Internet Explorer
7, other setup screen may be displayed.
In this case, make the proper adjust-
ments for the setup screen.
3 When the screen as shown on
the right appears, click “TCP/IP”.