Filter
Top Products
17
* Press RESET if the system cannot return to its original state after performing various operations.
This will reset the System as shown below.
• AV MODE resets to USER.
• TV channel resets to channel 1.
• Dual screen resets to normal.
• Audio setting initialises.
• Dolby Virtual resets to Off.
• Image position is initialised.
** Press SYSTEM RESET if the system does not operate after starting up.
NOTE
• Pressing RESET will not work if the System is in standby mode (indicator lights red).
• Pressing RESET will not delete channel preset and password. See page 60 for resetting the password when you know it.
See page 74 for initialising to the factory preset values when you forget your password.
Part names
AVC System
Front view
Rear view
RESET*
POWER button
INPUT 4 terminal
(S-VIDEO)
INPUT 4 terminal (VIDEO)
SYSTEM RESET**
INPUT 4 terminal (AUDIO L/R)
How to open the door.
POWER indicator
PC CARD slot
CARD indicator
Headphone
(When connecting headphones, the sound from the speakers is muted.)
• Still image mode deactivates.
• Teletext mode resets to normal.
• Speaker setting resets to SPEAKER-A.
• Audio Out setting resets to Fixed.
• Centre Channel Input setting resets to Off.
• Audio Only setting resets to Off.
Input 5 terminal
(AUDIO L/R)
ANTENNA INPUT
terminal
INPUT 5
terminal
(DVI-I)
CENTRE
CHANNEL
INPUT
terminal
AV OUTPUT
terminal
(VIDEO)
DC OUTPUT
terminal
(Terminal for expanded
functionality in the near future.)
EXTERNAL
SPEAKER terminals
INPUT 1
COMPONENT
video terminals
(Y, P
B, PR)
DISPLAY OUTPUT 1 terminal
DISPLAY
OUTPUT 2
terminal
AC INPUT
terminal
RS-232C
terminal
DISPLAY OUTPUT 3 terminal
AV OUTPUT terminals
(AUDIO L/R)
INPUT 3
COMPONENT video
terminals (Y, P
B, PR)
INPUT 2 terminal (S-VIDEO)
INPUT 2 terminals (AUDIO L/R)
INPUT 3 terminal (VIDEO)
INPUT 3 terminals (AUDIO L/R)
INPUT 1 terminal
(VIDEO)
INPUT 1 terminals (AUDIO L/R)
INPUT 2 terminal (VIDEO)
LC-32/37G2X-a 04.5.22, 11:49 AM17