Filter
Top Products
25
Basic adjustment settings
Auto installation
You can run auto installation again, even after setting
up the preset channels.
Press MENU and the MENU screen displays.
1
2
5
3
––––
Press c/d to select “Setup”.
MENU
[
Setup
...
Auto Installation
]
Setup Option
Child Lock
Speaker Setup
Auto Installation
Programme Setup
Position
[English]
[Normal]
Language
[West Europe]Text Language
Rotate
[Panorama]
4:3 Mode
[On]
WSS
6
Press c/d to select “Yes”, and then press
ENTER.
Press a/b to select the desired language
listed on the screen, and then press ENTER.
After this setting, auto search starts with the
following order.
1 Programme auto search
2 Auto labelling
3 Auto sorting
You do not need to do anything during the
auto search.
Press a/b to select “Auto Installation”, and
then press ENTER.
4
If you already set the password, enter it here.
• See page 60 for setting password.
Programme setup
You can run the auto installation procedure again at
any time, by accessing the Setup menu, then
Programme Setup. Channels can be tuned
automatically or manually.
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.
1
2
3
4
Press a/b to select “Programme Setup”,
and then press ENTER.
If you already set the password, enter it here.
• See page 60 for setting password.
NOTE
• Do not turn off the System while the message “Programme
set-up completed” is displayed, for the System is saving
the data found while the message is displayed.
MENU
[
Setup
...
Programme Setup
]
Setup Option
Child Lock
Speaker Setup
Auto Installation
Programme Setup
Position
[English]
[Normal]
Language
[West Europe]Text Language
Rotate
[Panorama]
4:3 Mode
[On]
WSS
5
Press c/d to select “Yes”, and then press
ENTER.
• Auto search starts with the following order.
1 Programme auto search
2 Auto labelling
3 Auto sorting
Auto search
You can also automatically search and download TV
channels by performing the procedure below. This is
the same function as programme auto search in auto
installation.
Press a/b to select “Auto Search”, and then
press ENTER.
NOTE
• Do not turn off the System while the message “Auto
Installation completed” is displayed, for the System is
saving the data found while the message is displayed.
LC-32/37G2X-c 04.5.22, 11:53 AM25