Filter
Top Products
49
Using external equipment
NOTE
• Macintosh adaptor may be required for use for some Macintosh computers.
• When connecting to a PC, the correct input signal type is automatically detected.
(See page 57.) If the PC image does not come in clearly, you may need to set the
Auto Sync. adjustment in the “Setup” menu. (See page 51.)
Connecting a PC
Use the INPUT5 terminals to connect a PC.
NOTE
• The PC input terminals are DDC1/2B-compatible.
• Refer to page 67 for a list of PC signals compatible with the System.
AVC System (rear view)
ø 3.5 mm stereo minijack cable
(commercially available)
PC
ø 3.5 mm stereo minijack cable
(commercially available)
RGB/DVI conversion cable
(commercially available)
DVI cable
(commercially available)
To watch the image from
this input terminal, you
need to select input source
(see page 46) and input
signal type (see page 52).
PC
LC-32/37G2X-g 04.5.22, 11:58 AM49