Filter
Top Products
53
Useful adjustment settings
Input Label
You can assign each input source a label you like.
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.
Press a/b to select “Input Label”, and then
press ENTER.
6
Repeat the above until the name is fully spelt
out, and then press ENTER.
• The name can be 6 characters or less.
A
BACK
CLEAR
END
K
U
B
L
V
C
M
W
D
DVD
N
X
E
O
Y
F
P
Z
G
Q
+
H
R
– _
I
S
.
J
T
0123456789
INPUT SOURCE
TV
INPUT1
INPUT2
DVD
INPUT4
INPUT5INPUT5
CARD
Press a/b/c/d to select each character
of the new name for the channel, and then
press ENTER.
(Example)
Colour system setting (for TV/AV
input mode)
You can change the colour system to one that is
compatible with the image on the screen.
Press MENU and the MENU screen displays.
1
2
4
3
Press c/d to select “Option”.
Press a/b to select “Colour System”, and
then press ENTER.
Press a/b to select a compatible video
signal system of your equipment, and then
press ENTER.
• Some items may be greyed out. They are not
selectable.
AUTO
PAL
SECAM
NTSC 3.58
NTSC 4.43
PAL-60
NOTE
• Factory preset value is “AUTO”.
• If “AUTO” is selected, colour system for each channel is
automatically set. If an image does not display clearly,
select another colour system (e.g. PAL, NTSC 4.43).
• This function is available for AV input mode and TV tuner
mode.
NOTE
• You cannot change labels if the INPUT SOURCE is TV or
CARD.
2
4
3
5
1
Press TV/VIDEO to select the input source
whose label you would like to change.
LC-32/37G2X-h 04.5.22, 0:00 PM53