Sharp TU-37GAX Flat Panel Television User Manual


 
8
Where to place the System
“System” means the Display and AVC System. First select the location where to place the System.
1
2
Selecting the location of the System
Select a place with no direct sunlight and good ventilation.
The Display and the AVC System are connected by the system cable.
(See page 9 for details.)
Setting the System in place
Handling the Display
CAUTION
When using the TV with the supplied stand attached, do not
remove the speaker. Doing so may disturb the balance
leading to product damage or personal injury.
Do not remove the stand and speaker from the Display unless
using an optional bracket to mount it.
Keep enough space above and behind the Display.
The TV weighs about 22 kg (LC-32G2X) and 24 kg (LC-37G2X).
Move it with two or more people.
When you move the Display, hold the portion of the Display, not
the speaker.
Handling the AVC System
CAUTION
Do not put a VCR or other device on the AVC System.
Keep enough space above and on the sides of the AVC System.
Do not block the ventilation openings on the top and left side, and
the exhaust fan on the right side.
Do not spread a thick cloth beneath the AVC System, or cover it
with one, as this can cause overheating and result in malfunction.
System cable
Display
AVC System
If you want to keep a longer distance
between the
Display and AVC System, please purchase
the optional system cable AN-07SC2 (about
7 meters). (See page 70.)
Preparation
CAUTION
Adjust the screen with both
hands. Put one hand on the
Display and tilt the screen
while steadying the stand
with your other hand.
You can adjust the screen
vertically up to 2 degrees
forward or 6 degrees back-
ward, or rotate 10 degrees
horizontally.
10 cm
or more
5 cm or more
5 cm or more
on both sides
Keep enough space
There is an exhaust fan
on the right side.
LC-32/37G2X-a 04.5.22, 11:49 AM8