Filter
Top Products
19
Display
AVC System
Turning on the power
Make sure that the system cable is connected before turning
on the power.
POWER indicator
POWER button
MAIN POWER button
POWER indicator
POWER button
1
2
Turning off the power
Press POWER on the remote control unit.
• The System enters standby mode and the image on the screen
disappears.
• Both POWER indicators change from green to red.
Press MAIN POWER on the Display.
• The POWER indicator on the Display gradually turns off.
• When the System is turned off by MAIN POWER , you cannot turn
on the power by pressing POWER.
NOTE
• If you are not going to use this System for a long period of time, be sure to
remove the AC cords from the power outlet.
• Weak electric power is still consumed even when both MAIN POWER and
POWER are turned off.
Watching TV
Press MAIN POWER on the Display.
• POWER indicator (Green): The System is on. (After a
few seconds, programme information appears with
sound.)
• POWER indicator (Red): The System is in standby. (Go
to step 2.)
Use any of the methods below to power on. Powering
on changes the LED from red to green.
• Press the POWER button on the Display.
• Press POWER on the AVC System.
• Press POWER on the remote control.
POWER indicator
Power off
The System is in standby mode.
The System is on.
Off
Red
Green
NOTE
• Check if the system cable is connected properly when display indicator flashes red.
LC-32/37G2X-b 04.5.22, 11:52 AM19