Sharp TU-37GAX Flat Panel Television User Manual


 
39
Using memory card
Recording a still image
You can record a still image on the card.
Press E REC.
1
2
Press FREEZE.
3
Press ENTER to update
the still image.
Onion
Tomato
Potato
x 1
x 1
x 1
Still
Cooking Time
Onion
Tomato
Potato
x 1
x 1
x 1
Cooking Time
Still
Still image was captured on a card.
Cooking Time
Still
“Still image was captured on a card.” displays.
• Recording may fail depending on the input
signal type or card memory status.
NOTE
Broadcasting types or input signals not available for
recording:
1 COMPONENT input
2 Copy guarded signal
3 DVI-I input
Ejecting the card
Make sure the card indicator lights up green.
Press EJECT button.
EJECT button is popped up.
1
2
Press EJECT button again.
PC card adapter itself pops up.
EJECT button
3
Take out the PC card adapter.
Inserting a PC card adapter
Press in the EJECT button if it is popped out.
Insert a memory card to a PC card adapter
beforehand. (See page 37.)
Insert the PC adapter card slowly.
CARD indicator lights up green when the card is
inserted.
PC CARD slot
CARD indicator
NOTE
When “Card is not inserted” is displayed, eject the PC
card adapter, and then insert the PC card adapter slowly
all the way to the end.
When over a thousand files are in a card, it takes several
minutes to load. (approx. 5 minutes.)
Even if the green light is on, you can not record on a card
right after you inserted it.
Make sure the CARD indicator lights green when you take
out a card. Never take out a card when the CARD indicator
lights red. This may damage the card.
Cooking Time
LC-32/37G2X-f 04.5.22, 1:50 PM39