Filter
Top Products
33
Monochrome
For viewing a video in monochrome.
Press a/b to select “Monochrome”, and
then press ENTER.
Press c/d to select “On”, and then press
ENTER.
Repeat steps 1 to 3 in 3D-Y/C.
1
2
3
Basic adjustment settings
3D-Y/C
Provides high quality images with minimal dot crawl
and cross colour noise.
Description
Normal adjustment
For movie image
For still image
Selected item
Standard
Fast
Slow
4
Press a/b to select “3D-Y/C”, and then
press ENTER.
Press MENU and the MENU screen displays.
1
2
Press c/d to select “Picture”.
3
Press a/b to select “Advanced”, and then
press ENTER.
5
Press a/b to select the desired level, and
then press ENTER.
NOTE
• “3D-Y/C” is not selectable depending on the input signal
type.
Activating 3D-Y/C on the remote control unit
Film mode
Automatically detects a film-based source (originally
encoded at 24/25 frames/second, depending on the
vertical frequency), analyses it then recreates each
still film frame for high-definition picture quality.
Press a/b to select “Film Mode”, and then
press ENTER.
• Some items may be greyed out. They are not
selectable.
Press c/d to select “On”, and then press
ENTER.
Repeat steps 1 to 3 in 3D-Y/C.
I/P setting
Adjusting the image and input signal can give you a
more beautiful picture.
Press a/b to select “I/P Setting”, and then
press ENTER.
• Some items may be greyed out. They are not
selectable.
Press c/d to select “Interlace” or
“Progressive”, and then press ENTER.
Repeat steps 1 to 3 in 3D-Y/C.
NOTE
• The I/P Setting is set to Progressive when Film Mode is “On”.
1
2
3
1
2
3
Press 3D-Y/C to switch the 3D-Y/C function on and
off.
C. M. S. – Hue
C. M. S. – Saturation
C. M. S. – Value
Colour Temp
Black
3D Y/C
Monochrome
Film Mode
I/P Setting
Standard
Fast
Slow
NOTE
• “3D-Y/C” is set to “On” when the System is turned back
on.
• 3D-Y/C may not operate depending on the input signal
type.
LC-32/37G2X-d 04.5.22, 11:55 AM33