Filter
Top Products
MOON Calypso DVD Transport / Player
Audio Connections
You can use either the analog audio outputs (if equipped), the digital audio outputs, or both depending on your
system requirements. If you are using a digital surround processor, such as the MOON Stargate, it is
recommended that you to use a digital audio connection. If you want to use your MOON Calypso-A DVD Player
with an analog stereo preamplifier or integrated amplifier, you must use an analog audio output connection. If
you are not sure, ask your dealer for recommendations about your specific setup. Whatever the type of
connection(s) you choose, don’t hesitate to use high quality cables. Poor quality cables can degrade the overall
sonic performance of your system.
G) Digital Audio Output (Electrical)
This output is on RCA type connector. You should use a 75Ω digital audio cable. This is the best of the two
available digital audio connection with the MOON Calypso.
H) Digital Audio Output (Optical)
This output is on a Toslink (EIAJ Standard) type connector, requiring a Toslink fiber optic digital audio cable. Use
this type of connection if the component you’re attempting to connect to the MOON Calypso doesn’t support
the ‘Electrical Digital Audio Output’ previously described.
I) Analog Audio Output (Calypso-A only)
This output is on RCA connectors, so you must have a pair of audio cables with RCA terminations.
____________________________________________________________________________________
Audio Connections 10