Filter
Top Products
MOON Calypso DVD Transport / Player
Special Operations (Cont’d)
Parental Control Activation/Deactivation
The “Parental Level” feature allows you to prevent DVD-Videos from being played by children or to have certain
discs played with alternative scenes. As a result, a DVD-Video can be programmed to contain parental control
information for either the entire disc or just certain scenes on the disc. These scenes are rated from 1 to 8 and
alternative, more suitable scenes for viewing by children are available on the disc. Ratings are country dependent.
(i) While the loaded disc is stopped, navigate to the OSD symbol on Multiple-Toolbar-1 and press the down navigation
button ($) on the remote control. The OSD main menu will appear on the TV screen. Go to the “Access Control”
menu in the “Special Functions” category.
(ii) Select “Enter Code” from menu and the “Enter Code” dialog window will appear.
(iii) Enter your 4-digit code (refer to page 32 for instructions on how to temporarily reconfigure your remote control).
(iv) Navigate to “Parental Level” using the down ($) and right (¦) navigation buttons.
(v) Navigate to the “Value Adjustment” bar (1-8) using the right (¦) navigation button.
(vi) Using the up and down ($) navigation buttons, select a rating for the disc currently loaded:
Rating “0” Rating is not active. The entire disc will play. (Displayed on screen as “- -”)
Ratings “1 – 8” The disc contains scenes not suitable for children. If you set a rating for the player, all scenes with
the same rating or lower will be played. Scenes with higher ratings will not be played unless an
alternative is available on the disc. The alternative must have the same or a lower rating. In the
event that no alternative is available, disc playback will stop and you will be prompted to enter
your 4-digit access control code.
(vii) Press the “OK” button or use the left navigation button (¥) to exit.
Changing the Country Setting
(i) While the loaded disc is stopped, navigate to the OSD symbol on Multiple-Toolbar-1 and press the down navigation
button ($) on the remote control. The OSD main menu will appear on the TV screen. Go to the “Access Control”
menu in the “Special Functions” category.
(ii) Select “Enter Code” from menu and the “Enter Code” dialog window will appear.
(iii) Enter your 4-digit code (refer to page 32 for instructions on how to temporarily reconfigure your remote control).
(iv) Navigate to “Change Country” using the down ($) and right (¦) navigation buttons.
(v) Using the up and down ($) navigation buttons, select a country from the available list.
(vi) Press the “OK” button or use the left navigation button (¥) to exit.
____________________________________________________________________________________
Special Operations 35