Filter
Top Products
MOON Calypso DVD Transport / Player
DVD Player Operation
The On-Screen Status Window
The on-screen “Status Window” (figure 4) reports the current operating condition of the MOON Calypso and
appears in the upper left portion of your TV/video projection screen. When a disc is playing, the function, title,
chapter or track, as well as the elapsed time are displayed in the icon. For further information on the on-screen
status window, please refer to pages 19 and 25.
Figure 4: MOON Calypso on-screen status window
Playing DVD Video Discs and Video CDs
Press the power button on the front panel or remote control. The blue LED on the front panel will illuminate.
Press the “OPEN/CLOSE” button on the front panel or the p button on the remote control to open the disc
drawer. Place the disc on the drawer. Close the disc drawer using the same button used to open it. Playback will begin
from the first title or track on the disc. The front panel display will show “READING” and “INFO”. The caption “INFO”
will remain on the front panel display until you press the “PLAY” button on the front panel or remote control (u). You may
also press OK button on the remote control to cancel the “INFO” message and begin playing the video disc from the
beginning. The MOON Calypso begins playing the disc and the front panel display will show the time, the title and chapter
or track number. To temporarily suspend playback of the disc, you can press either the “PAUSE” button on either the front
panel or remote control (;). Pressing “PAUSE” again will advance the disc one frame. You can use the ¥ and ¦
navigation buttons on the remote control to move forwards or backwards frame-by-frame. To resume normal
playback, press the “PLAY” button. To end disc playback, press the “STOP” button on either the front panel or remote
control (¢). To turn off the MOON Calypso, press the “STANDBY” button on the front panel or the “POWER” button on
the remote control; Both the blue LED and the front panel display will turn off.
The “Resume” feature applies to the DVD-Video disc or Video CD disc currently in the transport, as well as the
last four (4) discs played. To start playback of a disc from the point where it was last stopped, press the “PLAY” button
on the front panel or u on the remote control when the “Resume” symbol appears in the on-screen status window.
For more information on all functions available for DVD-Video Disc and Video CD playback, please refer to “Front Panel
Controls” (page 11) and “Remote Control Operation” (page 12).
____________________________________________________________________________________
DVD Player Operation 13