Filter
Top Products
MOON Calypso DVD Transport / Player
Installation Tips
The MOON Calypso DVD Transport/ Player should be placed on a rigid surface to prevent any accidents such as
falling over. It is highly recommended that it sit on its own dedicated shelf.
You should never place another component on top of this DVD Transport / Player. As well, you should avoid
placing it near a heat source or inside a closed cabinet that is not well ventilated. This could compromise the
Calypso’s performance and reliability.
In the event that you intend to place your Calypso in a rack mount type installation, we’ve made the setup as
user-friendly as possible. Simply remove each of the two (2) vertically mounted silver colored aluminum cheeks
found on either side of the front faceplate using an SAE 1/8 inch allen key; You will find two (2) screws located
on the rear of each side of the front faceplate which hold each aluminum cheek in place. When removing these
screws, make sure to keep one hand on the aluminum cheek so that it won’t fall and cause any damage. Once
all four (4) screws have been removed, you will have exposed the four (4) rack mount holes and the MOON
Calypso will be ready for mounting in a three (3) rack space area. We recommend that you store the aluminum
cheeks and their accompanying mounting screws in a safe place in the event that you require them in the future.
Finally, you should make all of your audio and video signal connections prior to making the AC connection
between the Calypso and the AC wall outlet.
____________________________________________________________________________________
Installation Tips 6