Filter
Top Products
C H A P T E R 6
Maintainingyour interactiveflatpanel
53 smarttech.com/kb/170446
I M P OR T A N T
Follow the instructions included with the floor stand ormounting apparatus.
To remove your interactive flat panel
1. Turn off your interactive flat panel and unplug the power cable from the wall outlet.
2. Remove all accessible cables and connectors.
3. Attach the eyebolts for your lifting equipment. For more information, see Before mounting your
interactive flat panel on page 13.
4. Lift your interactive flat panel from its mounting location.
C A U T I ON
o
Do not leave the interactive flat panel face up, face down or upside down for anextended
period of time, because it could cause permanent damage to the screen.
o
Do not place the interactive flat panel on a sloping or unstable cart, stand or table,
because the interactive flat panel could fall, resulting in injury and severe product
damage.
Transporting your interactive flat panel
Save your original packaging so that you can repack your interactive flat panel with as much of the
original packaging as possible. This packaging was designed with optimal shock and vibration
protection. If your original packaging isn’t available, you can purchase the same packaging directly
from your authorized SMART reseller (smarttech.com/where).
C A U T I ON
Transport your interactive flat panel only in original or replaced packaging. Transporting your
interactive flat panel without correct packaging voids your warranty and could lead to product
damage.