Filter
Top Products
Positioning the speakers
For the best possible surround sound, all the
speakers other than the subwoofer should be
placed at the same distance from the listening
position (_).
Place speakers as illustraled below.
m
• Do not set the speakers in an inclined posmon.
• Do not place the speakers inlocations that are:
Extremely hot or cold
Dusty or dirty
Very humid
Subject to vibrations
Subject to direct sunlight
• Use caution when placing the speakers and/or
speaker stands that are attached with the speakers on
aspecially treated (w ixed,oile& polishe& etc.) floor,
as staining or discoloration may result.
• When cleaning, use a soft cloth such as a cleaning
cloth lbr glasses.
• Do not use any type of abrasive pad, scouring
powder, or solvent such as alcohol or benzine.
• Do not lean or hang on the speaker, as the speaker
may fidl down.
• When you change the positions of the speakers, it is
recommended that you change the settings. For
details, see "Getting Optimal Surround Sound lbr a
Room" (page 82) md "Calibrating the Appropriate
Settings Automatically" (page 841.
Follow Ihe steps below to make the minimum
number of basic adjustments for using the
system.
::: :;::_ I/_J
i i
i
7
;7! ;777
;7;;J
f'
O
DISPLAY
1 Turn on the TV.
2 Press I/(_.
m
• Disconnect the headphones when you perform
the Quick Setup. You cannot operate steps after
11wilh the headphones connected.
• Make sure that the function isset to "DVD"
(page 37).
3 Switch the input selector on your TV so
that the signal from the system
appears on the TV screen.
[Press [ENTER] torur'i QUICK SETUP.]
appears at the bottom of the TV screen. If
this message does not appear, recall the
Quick Setup display (page 26) and perl\_rm
again.
4 Press @ without inserting a disc.
The Setup Display for selecting the
language used in the on=screen display
appears.
24us