Filter
Top Products
To connect the VIDEO/AUDIO OUT jacks of other components to the
SAT/CABLE (VIDEO IN/AUDIO IN) jacks of this unit
Connect the VCR or other components to the SAT/CABLE (VIDE() IN/AUDIO IN) jacks usiug tile
video/audio cord (not supplied). When connecting a cord, be sure to match the color-coded sleeves to
the appropriate jacks on the components.
To connect the DIGITAL MEDIA PORT adapter
Connect a DIGITAL MEDIA PORT adapter (not supplied) to the DMPORT1 or 2 jack. For details of
the DIGITAL MEDIA PORT adapter, see "Using tile DIGITAL MEDIA PORT Adapter" (page 77).
To listen to the portable audio source sound through the system
Connect tile audio output jacks of the portable audio source to the AUDIO 1N jack on tile front panel
of the unit with the stereo mini-plug cord (not supplied).
• When listening to MP3 lbrmat recordings using a portable audio source, you can enhance the sound.
Press FUNCTION to select "AUDIO. ' Connect the portable audio source. Press SOUND FIELD +_ repeatedly
until "A.F.D. STD" appears in the front panel display.
To cancel select other than "A.F.D. STD."
If you connect a digital satellite receiver with a DIGITAL OUT (COAXIAL
or OPTICAL) jack
A digital satellite receiver cml be connected to the SAT/CABLE (DIGITAL IN COAXIAL or
OPTICAL) jack instead of the SAT/CABLE (AUDIO IN) jacks of the unit.
To connect, use a digital coaxial cord (not supplied) lot the DIGITAL 1N COAXIAL jack or digital
optical cord (not supplied) l\tr the DIGITAL IN OPTICAL jack.
The system can accept both digital and analog signals. Digital signals have priority over analog signals.
(COAXIAL has priority over OPTICAL.) If the digital signal ceases, the analog signal will be
processed after 2 seconds.
Digital coaxial cord
or
@ Digital optical cord
If you connect a digital satellite receiver without a DIGITAL OUT jack
Cormecl the digital satellite receiver to tile SAT/CABLE (AUDIO IN) jacks only of tile unit.
if)
I'D
_=.
I
z
o
m
i
continued_
35us