Filter
Top Products
The sound loses stereo effect when you play a
VIDEO CD, a CD, or an MP3.
• Set [AUDIO] to [STEREO] hy pressing AUDIO
(page 52)
• Make sure the unit is connected properly
The surround effect is difficult to hear when
you are playing a Dolby Digital, DTS, or MPEG
audio sound track.
• Make SLIl"t'the sound field function is on (page 42).
• Check the speaker connections and settings (page
19, 92)
• Depending on the DVD, the output signal may not
be the entire 5 1 channeh It may be monaural or
stereo even ifthe sound track is recorded in Dolby
Digital or MPEG audio format
The sound comes from the center speaker
only.
• Depending on tile disc, the sound may come from
the center speaker only
No sound is heard from the center speaker.
• Check the speaker connections and settings (page
19, 92)
• Make sure the sound field function is on (page 42).
• Depending on the source, the effect of the center
speaker may be less noticeable
• A 2 channel source is being played
No sound or only a very low-level sound is
heard from the surround speakers.
•Check the speaker connections and settings (page
19, 92)
• Make sure the sound field function is on (page 42).
• Depending on the source, the effect of the
surround speakers may be less noticeable
• A 2 channel source is being played
There is no sound from the speakers that are
indicated in the front panel display.
• Tile front panel display indicates the selected
ISPEAKER FORMATION] It does not indicate
the speakers which output sound (page 42, 82).
The beginning of the sound is cut off.
• Set the Movie/Music mode to "MOVIE" or
'MUSIC" (page 41 ).
• Set the sound field to "A E.D. STD" (page 42)
Operation
Radio stations cannot be tuned in.
• Check that the antenna (aerial) is c(mnectcd
securely Adjust the antenna (aerial) or connect an
external antenna (aerial) if necessary
• The signal strenglb of the stations is too weak
(when tuning ill with automatic tuning) Use direct
tuning.
• No st aions have been preset or the preset stations
have been cleared (when tuning by scanning
preset stations) Preset the stations (page 65)
• Press DISPLAY so that the frequency ap?ears ill
the front panel display
The remote does not function.
• There are obstacles between the remote and the
unit.
• The distance between the remote and the unit is
too far.
•The remote is not pointed at the remote sensor on
the unit
• The batteries ill the remote are weak
The disc does not play.
• There is no disc inserted
• The disc is upside down
Insert the disc with the playback side facing down
• The disc is skewed on the disc tray
• The system cannot play CD-ROMs, etc (page 6)
• The region code on the DVD does not match Ihe
system.
• Moisture has condensed inside the unit and may
cause damage to Ihe lenses Remove Ibe disc and
leave the unit turned on lk)r about half all hour.
The MP3 audio track cannot be played.
• The DATA CD is not recorded in the MP3 lbrmat
that conforms to ISO 9660 Level l/Level 2, or
Joliet.
• The DATA DVD is not recorded in an MP3
format that conforn> to UDF (Universal Disk
Format).
• The MP3 audio track does not have Ihe extension
"MP3."
• The data is not formatted ill MP3 even though it
has Ibe extension ".MP3."
• The data is not MPEGI Audio Layer 3 data.
• The system cannot play audio tracks in MP3PRO
format.
• The [MODE (MP3, JPEG)] setting has been set to
[IMAGE (JPEG)] (page 62).
• If you cannot change the [MODE (MP3, JPEG)]
setting, reqoad the disc or turn the system ofL then
on.
The 3PEG image file cannot be played.
• The DATA CD is not recorded in a JPEG l()rmat
that conforms to ISO 966(t Level l/Level 2, or
Joliet.
• The DATA DVD is not recorded in aJPEG format
that conforms to UDF (Universal Disk Format).
g8us