Filter
Top Products
29
Hookups
D-1
: Connecting to the 5.1ch input jacks
You can enjoy 5.1ch surround sound using
the internal Dolby Digital, MPEG audio,
DTS, or Super Audio CD Multi decoder of
this player. Note that 7.1-channel MPEG
signals are mixed down to 5.1-channel
signals.
D-2
: Connecting to a digital jack
This connection will allow you to use the
Dolby Digital, MPEG audio, or DTS
decoder function of your AV amplifier
(receiver). You are not able to enjoy the
surround sound effects of this player.
z Hints
• For connection
D-2
For correct speaker location, refer to the operating
instructions of the connected components.
•To enhance the sound performance:
– Use high-performance speakers.
– Use front, rear, and centre speakers of the same
size and performance.
– Place the subwoofer between the left and right
front speakers.
Notes
For connection
D-2
• After you have completed the connection, be
sure to set “DOLBY DIGITAL” to “DOLBY
DIGITAL” and “DTS” to “DTS” in Quick Setup
(page 30). If your AV amplifier (receiver) has an
MPEG audio decoder function, set “MPEG” in
“AUDIO SETUP” to “MPEG.”
• When you connect an amplifier (receiver) that
conforms to the 96kHz sampling frequency, set
“48kHz/96kHz PCM” in “AUDIO SETUP” to
“96kHz/24bit” (page 80).
• Super Audio CD audio signals are not output
from the digital jack.