Filter
Top Products
57
Sound Adjustments
DVD VIDEO
1: ENGLISH
1 8
(
3 4
)
1 2
(
2 7
)
T
1 : 3 2 : 5 5
LRC
DOLBY DIGITAL 3/2.1
PROGRAM FORMAT
LFE
LS RS
PLAY
z Hint
You can also select “AUDIO” from the Control
Menu (page 14).
Notes
• While playing a Super VCD on which the audio
track is not recorded, no sound will come out
when you select “2:STEREO,” “2:1/L,” or “2:2/
R.”
•You cannot change the sound for Super Audio
CDs.
Displaying the audio
information of the disc
Press DISPLAY during playback to display
the Control Menu. Select “AUDIO” using
X/x. The channels being played are
displayed on the screen.
For example, in Dolby Digital format,
multiple signals ranging from monaural to
5.1 channel signals can be recorded on a
DVD VIDEO. Depending on the DVD
VIDEO, the number of the recorded
channels may differ.
* “PCM,” “MPEG,” “DTS,” or “DOLBY
DIGITAL” is displayed.
In the case of “DOLBY DIGITAL,” the channels
in the playing track are displayed by numbers as
follows:
For Dolby Digital 5.1 ch:
Rear component 2
Front component 2+
Center component 1
LFE (Low Frequency
Effect) component 1
**The letters in the program format display
indicate the following sound components:
L: Front (left)
R: Front (right)
C: Center
LS: Rear (left)
RS: Rear (right)
S: Rear (monaural): The rear
component of the Dolby Surround
processed signal and the Dolby
Digital signal
LFE: Low Frequency Effect signal
z Hint
When playing the Dolby Digital or DTS sound
tracks, “LFE” is enclosed in a dotted line when the
LFE signal is not being output.
Current audio format*
Currently playing programme format**
DOLBY DIGITAL
3 / 2 . 1