Filter
Top Products
72
1 Slide the TV/DVD switch to DVD.
2 While holding down [/1, press down
on the scroll key.
“AV P-90” (default) appears in the LCD
screen.
3 Release [/1.
4 Toggle the scroll key up or down to
select your AV amplifier (receiver)’s
manufacturer code (see “Code
numbers of controllable AV amplifiers
(receivers)” below).
5 Press down on the scroll key.
The manufacturer code flashes and the
remote is set. The VOL +/– buttons
control the AV amplifier’s volume.
◆
If you want to control the TV’s volume
Slide the TV/DVD switch to TV.
Code numbers of controllable AV
amplifiers (receivers)
If more than one code number is listed, try
entering them one at a time until you find the
one that works with your AV amplifier
(receiver).
Manufacturer Code number
Sony 80, 88, 89, 91
Denon 84, 85, 86
Kenwood 92, 93
Onkyo 81, 82, 83
Pioneer 99
Sansui 87
Technics 97, 98
Yamaha 94, 95, 96
z Hint
If you want to control the TV’s volume even when
the TV/DVD switch is set to DVD, repeat steps 1
through 5, and enter the code number 90 (default).
Controlling the volume of your
AV amplifier (receiver) with the
remote
MGA/Mitsubishi 4, 12, 13, 17
NEC 4, 12
Panasonic 6, 19
Philco 3, 4
Philips 8, 21
Pioneer 16
Portland 3
Proscan 10
Quasar 6, 18
Radio Shack 5, 14
RCA 4, 10
Sampo 12
Samsung 3, 12, 20
Sanyo 11, 14
Scott 12
Sears 7, 10, 11
Sharp 3, 5, 18
Sylvania 8, 12
Teknika 3, 8, 14
Toshiba 7
Wards 3, 4, 12
Yorx 12
Zenith 15
Number
buttons
[/1
VOL +/–
TV/DVD
switch
Scroll key