Filter
Top Products
82
Note
If each of the front or rear speakers are not placed
at an equal distance from your listening position,
set the distance according to the closest speaker.
◆ LEVEL (FRONT)
Varies the level of each speaker. Be sure to
set “TEST TONE” to “ON” for easy
adjustment.
The default adjustments are in parentheses.
◆ LEVEL (REAR)
Varies the level of the rear speakers. Be sure
to set “TEST TONE” to “ON” for easy
adjustment.
The default adjustments are in parentheses.
To adjust the volume of all the speakers
at one time
Use the amplifier’s (receiver’s) volume
control.
◆ TEST TONE
The speakers will emit a test tone. Use this
when you use the 5.1CH OUTPUT jacks and
adjust the “LEVEL (FRONT)” and “LEVEL
(REAR).”
L (0 dB)
R (0 dB)
CENTER
(0 dB)
SUBWOOFER
(DVD: –5 dB/
SUPER AUDIO
CD: 0 dB)
Set this between –6 dB and 0
dB in 0.5 dB increments.
Set this between –6 dB and 0
dB in 0.5 dB increments.
Set this between –12 dB and 0
dB in 0.5 dB increments.
For DVDs:
(When the “SIZE”
is set to
the default setting
):
Set this between –10 dB and
+10 dB in 0.5 dB increments.
(When the “SIZE”
is not set
to the default setting
):
Set this between –15 dB and
+5 dB in 0.5 dB increments.
For Super Audio CDs:
Set this between –10 dB and
+10 dB in 0.5 dB increments.
L (0 dB)
R (0 dB)
Set this between –12 dB and
0 dB in 0.5 dB increments.
Set this between –12 dB and
0 dB in 0.5 dB increments.
OFF
ON
The test tone is not emitted
from the speakers.
The test tone is emitted from
each speaker in sequence while
adjusting level.
Adjusting the speaker volume
and level
1 Select “SPEAKER SETUP” in the
Setup Display.
2 Select “TEST TONE” and set to “ON.”
You will hear the test tone from each
speaker in sequence.
3 From your listening position, select
“LEVEL (FRONT)” or “LEVEL (REAR)”
and adjust the value using X/x.
The test tone is emitted from both left
and right speakers simultaneously.
4 Select “TEST TONE” and set to “OFF”
to turn off the test tone.
Note
The test tone signals are not output from the digital
jack.