Filter
Top Products
30
Step 3: Connecting the Power Cord
Plug the player and TV power cord into an AC outlet (mains).
Step 4: Quick Setup
Follow the steps below to make the minimum number of basic adjustments for using the
player. To skip an adjustment, press > (or turn the ./> dial on the player clockwise).
To return to the previous adjustment, press .(or turn the ./> dial on the player
counterclockwise).
1 Turn on the TV.
2 Press [/1.
3 Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
“Press [ENTER] to run QUICK
SETUP” appears at the bottom of the
screen. If this message does not appear,
select “QUICK” under “SETUP” in the
Control Menu to run Quick Setup (page
74).
4 Press ENTER without inserting a
disc.
The Setup Display for selecting the
aspect ratio of the TV to be connected
appears.
[/1
./>
X/x
ENTER
5 Press X/x to select the setting
that matches your TV type.
◆If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 75)
◆If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
(page 75)
6 Press ENTER.
The Setup Display for selecting the type
of video signal appears.
SCREEN SETUP
TV TYPE:
BLACK LEVEL:
BLACK LEVEL
(
COMPONENT OUT
)
:
SCREEN SAVER:
BACKGROUND:
16:9
4:3 LETTER BOX
16:9
COMPONENT OUT:
4:3 OUTPUT:
INTERLACE
FULL
OFF
OFF
4:3 PAN SCAN